Arched Sectional White Bronze Entry Set

This sectional arched style entry set has a rustic appeal but will marry well in both traditional and transitional settings. Exterior and Interior sides shown. Two finishes available: Tumbled white bronze and polished white bronze. Available as both a single cylinder (key on the exterior side only) or double cylinder ( key on both sides of the door ).

This entry set has a rustic appeal but will fit in both traditional and transitional settings. It is cast from a white bronze alloy and is thus great for corrosive environments because the alloy will not rust. The thumblatch portion would mount on the exterior side of the door and knob and thumbturn on the interior. It will fit doors with both a 2 3/4" or 2 3/8" backset. It uses a standard 2 1/8" face bore and a standard 1" edge bore. It will work on a door that has a center to center measurement of 5.5" or greater between both 2 1/8" bores. The finish should be expected to wear with time and lighten where touched, which is part of the beauty of white bronze. The tumbled white bronze is a slightly matted finish, which shows some of the casting distressing. The polished white bronze finish has no finish variation and will come more glossy to begin with. This sets fits all standard tubular prepared door or doors with no existing lock prep. The distance between the center of the latch and the bottom through bolt for the handle is 7".